With the increasing city traffic and the cost of petrol, it is becoming difficult to maintain the bike mileage. Many bike owners have commented that they regularly spend too much money on them despite owning the most fuel-efficient bikes. Their bikes cover most of their expenses, with minimum mileage being the primary issue.
If you’ve ever wondered how to increase the fuel efficiency of motorcycles, the ten proven strategies listed below can help you.
10 Tips to Increase Fuel Efficiency or Bike Mileage
Following are 10 important tips to increase the fuel efficiency of motorcycles.
1. Servicing Your Bike Regularly
Regular bike servicing plays an important role in increasing the mileage of the bike. Bike service is the process of maintenance and repair of a motorcycle. Keeping your motorcycle in good condition is important to ensure a safe and enjoyable ride. There are many different aspects to bike service, from cleaning and lubricating chains to repairing flats and adjusting brakes. A professional bike mechanic can help you keep your bike in good condition.
2. Adjust Carburetor Settings
You can adjust the carburetor settings to change the bike performance. For example, a high carburetor setting will result in more power, while a low setting will better fuel economy. This is one of the most common ways to Increase the fuel efficiency of motorcycles. The ideal setting will vary depending on the preferences of the bike and rider.
Changing carburetor settings is a relatively simple process, but it is important to be careful when making adjustments. Too much or too little air or fuel can damage the engine. If you are unsure of how to adjust the carburetor on your bike, it is best to consult a professional.
3. Check Tyre Pressure
Tyre pressure is one of the most important aspects of maintaining bike mileage. Incorrect tyre pressure can lead to several problems, including reduced fuel efficiency, increased wear and tear in tyres, and reduced handling. You must check your motorcycle tyre pressure regularly and inflate or deflate tyres as needed.
4. Choose High-Quality Fuel to Increase Fuel Efficiency
Fuel is like the blood of a motorcycle, so it is important to choose high-quality fuel to increase the mileage of the bike. The motorcycle’s majority of functions begin and end with fuel. So knowing how to choose the right fuel and what types of petrol your bike needs is the most important aspect.
5. Avoid Rash Riding
To increase bike mileage, avoid rash riding. Riding a bike slowly can be a great way to increase the fuel efficiency of motorcycles. It is not only a comfortable way to move around but also reduces the chances of accidents. You can also stop and take a break whenever you want. Just pay attention to the motorcycle driving rules and be careful while riding on busy roads.
6. Ride at Economy Speed
It is important to follow speed limits within city or municipal limits. It is beneficial not only for your safety but also for maintaining the mileage of your bike. If you avoid rapid acceleration and always ride below 40-50km (economy speed), your bike mileage will improve.
7. Turn Off The Engine at the Traffic Signal
One of the best ways to reduce fuel consumption is to turn off your bike engine at a traffic signal. It may seem small, but it can significantly affect your fuel consumption. When idling at a red light, you are wasting fuel unnecessarily. Switching off your bike engine will save fuel and help the environment.
8. Avoid Parking in the Sunlight
Avoid parking your bike in direct sunlight. The sun’s heat can evaporate the petrol in your tank, leading to a loss of your bike’s power and performance. Additionally, the sunlight can damage your bike’s plastic and rubber parts over time. If you must park in the sun, try to find a spot in the shade or where your bike is protected from direct sunlight; this will save fuel and improve your bike mileage.
9. Clean and Lubricate
It is important to wash your motorcycle regularly and keep the motorcycle chain clean and well-oiled to ensure high performance and increase fuel efficiency. A clean chain will help your bike run more smoothly, while a well-oiled chain will help reduce friction and prevent rust. You can clean your chain with a simple brush and degreaser, then grease it with motorcycle-specific chain lubricant. Make sure to clean and lubricate the motorcycle chain regularly, at least once a month, to keep your bike running at its best.
10. Alternate the Products
It is a misconception that replacing the original bike parts with aftermarket parts will improve the bike’s fuel efficiency. However, this is not always the case. Sometimes it leads to a reduction in fuel efficiency. Aftermarket parts are not always made to the same standards as the original parts. In addition, aftermarket parts may not be specifically designed for your bike, leading to reduced efficiency.
So, if you want to improve the fuel efficiency of your bike, it is best to use the original parts.
How To Increase Mileage Of Petrol Bike?
Mileage is an important performance indicator of an automobile that determines how much distance it can cover with a certain amount of fuel. Mileage is a strong decision factor when it comes to buying a new or second-hand two-wheeler in India. Poor mileage reduces the value of a bike, so considering the best petrol bikes in India can help you ensure that you get a model with excellent fuel efficiency.
You can do a few things to increase your bike’s mileage. You can ensure that your bike runs smoothly and efficiently by following fuel-saving tips.
- Make sure you’re using the right engine oil.
- Ride your bike with optimum tyre pressure.
- Use clutch as minimum as possible.
- Check your chain regularly and lubricate it as needed.
- Avoid sudden braking and high acceleration.
- Maintain an idle and constant speed.
- Make sure your engine oil is up to date.
- Do not overload your bike.
